Description
Description: HDMI DVI OVER IP TRANSMITT & RECEIV KIT
Tripp Lite HDMI/DVI Over IP Transmitter & Receiver Extender Kit Audio/Video with RS-232 Serial and IR Control 1920 x 1080 (1080p) @ 60 Hz, 656 ft. (200 m) – Kit – video/audio/infrared/serial extender – HDMI – up to 656 ft – TAA Compliant
The B160-101-HDSI HDMI/DVI
Audio/Video with RS-232 Serial and IR Control over IP Extender Kit extends and
distributes HDMI or DVI audio/video, RS-232 serial and IR (infrared) remote
signals through a dedicated Ethernet network switch* located up to 328 feet
(100 m) from the transmitter. With an additional 328 feet between the switch
and the receiver, the maximum distance from source to display is 656 feet (200
m). You can also directly
connect the transmitter and receiver up to 328 feet apart with Cat5/Cat6
cabling.
The B160-101-HDSI is designed for managed network
switches with IGMP, which allow login and remote management via switch
interface. You can connect up to 64 transmitters and 255 receivers in a single
managed switch installation.**
The B160-101-HDSI supports
video resolutions up to 1920 x 1080 (1080p) at 60 Hz. In a point-to-multipoint switch installation, you can send the HDMI or DVI video source (a DVI adapter cable is included) to
any analog or digital display, including VGA and DisplayPort . It extends IR control signals
that control a source, such as a Blu-ray player, from a remote display, as
well as RS-232 signals at serial baud rates up to 57600 Bps.
*B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.
**Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.
Whats in the Box
- Transmitter unit
- Receiver unit
- (2) External power supplies w/NEMA 1-15P plug (Input: 100–240V, 50/60 Hz, 0.5A
- Output: 5V, 2A)
- Plug adapters for U.S., U.K., Europe and Australia
- IR-In cable
- IR-Out cable
- (2) HDMI to DVI adapter cables
- Mounting hardware
- Owner’s manual
Key Selling Points
Converts source video to IP-based signal transmitted to and distributed through network switch
Transmitter and receiver each extend signal up to 328 ft. (100 m) from switch for maximum distance of 656 ft. (200 m)
Transmitter and receiver can also connect directly without switch up to 328 ft. apart
Allows login and remote management via switch interface
Connect up to 64 transmitters and 255 receivers in single managed switch installation
HDMI output on transmitter for connecting a local display
Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz