Ruckus Wireless ICX 7150-48ZP Switch Z-Series – ICX7150-48ZP-E8X10GR-RMT3

$8,700.00

Ruckus ICX 7150-48ZP – Z-Series – switch – L3 – managed – 16 x 100/1000/2.5G (PoH) + 32 x 10/100/1000 (PoE+) + 8 x 10 Gigabit SFP+ (uplink) – front to back airflow – rack-mountable – PoH / PoE+ (740 W) – AC 100 – 240 V – for Brocade ICX 7150-48ZP

SKU: ICX7150-48ZP-E8X10GR-RMT3 Categories: , Brand: Ruckus Wireless

Description

ENTRY-LEVEL ACCESS SWITCH FAMILY DELIVERS UNPRECEDENTED PERFORMANCE AND FEATURES IN ITS CLASS

The Ruckus® ICX® 7150 family of stackable switches delivers the performance, flexibility, and scalability required for enterprise access deployment, raising the bar with non-blocking performance and up to 8×10 GbE ports for uplinks or stacking. It offers seamless interoperability with Ruckus wireless products to deliver unified wired and wireless network access. In addition, Ruckus Multigigabit Ethernet technology offers bandwidth speeds needed to optimize performance of the latest generation high performance wireless access points and edge devices, over standard Ethernet cables.

The Ruckus ICX 7150 family of switches are available in three formats:

RUCKUS ICX 7150 SWITCHES

The standard Ruckus ICX 7150 switches are available in 24-, and 48-port 10/100/1000 Mbps models with four 1/10 GbE dual-purpose uplink/stacking ports. These switches are available with or without PoE+ power. Silent operation is available for out-of-closet environments. 

RUCKUS ICX 7150 Z-SERIES SWITCHES

The Ruckus ICX 7150-48ZP 48-port switch adds higher performance, greater resiliency and increased PoE power. The switch offers Multigigabit technology (IEEE 802.3bz) to match the highest performing 802.11ac Wave 2 wireless access points available, with dual redundant, hot-swappable power supplies and fans, and up to 8×10 GbE uplink/stacking ports.

The switch offers 16 Multigigabit (100Mbps/1Gbps/2.5Gbps) ports, each with Power-over-HDBaseT (PoH) up to 90 watts and 802.3bt ready, plus 32 10/100/1000 Mbps ports with PoE+. With a maximum PoE budget of 1480 watts, this switch delivers the power, and performance, to drive PoE+ power to all 48 ports.

RUCKUS ICX 7150 COMPACT SWITCHES

The Ruckus ICX 7150-C12P compact 12-port stackable switch features a fanless design to operate silently in out-of-closet environments such as offices, classrooms, and retail spaces. It offers PoE+ on all 12 ports to drive devices such as wireless APs, VoIP phones, lighting fixtures or surveillance cameras. With 2×1/10 GbE uplink/stacking ports, the ICX 7150-C12 delivers high performance in a small package. 

STACKING ACROSS THE ICX 7150 FAMILY

Ruckus stacking technology makes it possible to stack up to twelve Ruckus ICX 7150 switches into a single logical switch. This allows the Ruckus ICX 7150 to deliver a class-leading 480 Gbps of aggregated stacking bandwidth and offer simple and robust expandability for future growth. Stacking is supported across the ICX 7150 family and all ICX 7150 models including the ICX 7150 compact switch and the ICX 7150-48ZP can be mixed within the same stack. This stacked switch has only a single IP address that simplifies management and offers transparent forwarding across up to 600×1 GbE ports or up to 192×2.5 GbE ports, and up to 96×10 GbE ports. When new switches join the stack, they automatically inherit the stack’s existing configuration file, enabling a plug-and-play network expansion.

Because the ICX 7150-48ZP switch has twice as many uplink ports, when it is added to a stack of other ICX 7150 switch models, the effective bandwidth of all the switches is doubled. By designing the stack this way, all four of the 10GbE ports on the ICX 7150 switches can be used for stacking (rather than having to split the four ports between stacking and uplinks), and leveraging four of the 10GbE ports on the ICX 7150-48ZP for stacking and the other four 10GbE ports can be used for uplinks.

ENTERPRISE-CLASS AVAILABILITY

The Ruckus ICX 7150 Switches help deliver continuous availability to optimize the user experience. Ruckus stacking technology provides high availability by performing real-time state synchronization across the stack and transferring switch management control from the master stack controller to the standby controller if the master stack controller experiences a failure. When hot-inserting or hot-removing a stack member to increase capacity or perform service upgrade, traffic flows will not experience interruption.

In addition to stack-level high availability, Ruckus ICX 7150 Switches also support stack level ISSU (In Service Software Upgrade), a unique capability that allows the user to perform software upgrades to a Ruckus ICX 7150 stack without service interruption. Taking high-availability and reliability even further, the Ruckus ICX 7150 Z-Series switch offers redundant hot swappable load sharing power supplies and up to 2 hot swappable fans. 

Additional information

Weight 20 lbs
Dimensions 574.00 × 493.00 × 183.00 in
Product Description Ruckus ICX 7150-48ZP - Z-Series - switch - 48 ports - managed - rack-mountable
Device Type Switch - 48 ports - L3 - managed - stackable
Enclosure Type Front to back airflow rack-mountable 1U
Subtype 2.5 Gigabit Ethernet
Ports 16 x 100/1000/2.5G (PoH) + 32 x 10/100/1000 (PoE+) + 8 x 10 Gigabit SFP+ (uplink)
Power Over Ethernet (PoE) PoH / PoE+
PoE Budget 740 W
Performance Switching capacity (full duplex): 304 Gbps u00a6 Forwarding performance (full duplex): 226 Mbps u00a6 Aggregate stacking bandwidth: 480 Gbps
Capacity Switches in a stack: 12 u00a6 MAC addresses: 16384 u00a6 VLANs supported: 4095 u00a6 PVLANs supported: 32 u00a6 STP instances: 254 u00a6 ARP entries: 4094 u00a6 IPv6 routes: 1000 u00a6 IPv4 routes: 1000 u00a6 Next hop address: 4094 u00a6 Trunk groups: 128 u00a6 Ports per trunk group: 16 u00a6 Jumbo frame size: 9216 u00a6 QoS priority queues per port: 8 u00a6 Layer 2 multicast groups: 3072 u00a6 Layer 3 multicast groups: 2048 u00a6 Port Extenders (PE) per fabric: 36 u00a6 Port Extender (PE) cascade depth (units): up to 6
Jumbo Frame Support Yes
Routing Protocol OSPF, RIP, RIP-1, RIP-2, IGMPv2, IGMP, VRRP, static IP routing, IGMPv3, ECMP, policy-based routing (PBR), RIPng
Remote Management Protocol SNMP 1, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI, NTP
Features Flow control, layer 2 switching, auto-sensing per device, power over Ethernet (PoE), BOOTP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, High Availability, firmware upgradable, SNTP support, DDos attack prevention, Metro Ring Protocol (MRP) support, sFlow, Per-VLAN Spanning Tree (PVST), PIM-SM snooping, Remote Fault Notification (RFN), IP Precedence, SSH support, Jumbo Frames support, MLD snooping, PoE+, Trusted Platform Module (TPM), Per-VLAN Spanning Tree Plus (PVST+), Equal-Cost Multipath (ECMP), Uni-Directional Link Detection (UDLD), IPv4 support, hot swappable dual fans, LLDP support, Link Aggregation Control Protocol (LACP), Management Information Base (MIB), MAC address lockout, Dynamic VLAN Support (GVRP), Class of Service (CoS), Strict Priority (SP), Generic Attribute Registration Protocol (GARP), IGMP proxy, redundant fans, GARP VLAN Registration Protocol (GVRP), Type of Service (ToS), DiffServ Code Point (DSCP) support, hot swappable power supply, OpenFlow support, Extended Fabric, power over HDBaseT (PoH), rate limit, AES encryption, MAC address learning, MAC address authentication, Authentication, Authorization and Accounting (AAA), Static Link Aggregation, VLAN Double Tagging (Q-in-Q), Root Guard, VLAN mirroring, Private VLAN, IGMP fast leave, STP BPDU Guard, MAC based VLAN, loopback detection, Hybrid OpenFlow 1.3, VLAN Tagging, MAC address mapping
Compliant Standards Plug and Play, EN 61000-3-2, EN50081-1, ICES-003, EN 61000-3-3, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, EN 61000-4-8, UL 60950-1 Second Edition, WEEE, RoHS, EN 61000-6-3, FCC Part 15 A, CAN/CSA C22.2 No. 60950-1-07, EN 60825-2, IEC 60950-1 Second Edition, VCCI Class A, EN 60950-1:2006, IEC 68-2-6, AS/NZS 55022, IEC 68-2-36, EN 55022/CISPR 22 Class A, IEC 68-2-32
Power AC 100 - 240 V (50/60 Hz)
Power Redundancy Optional
Manufacturer Warranty Limited lifetime warranty
Designed For Brocade ICX 7150-48ZP
Encryption Algorithm AES
Authentication Method Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2)
RAM 1 GB
Flash Memory 2 GB
Status Indicators Power, status
Interfaces 16 x 100/1000/2.5G RJ-45 PoH - 15.4 W u00a6 32 x 10/100/1000 Base-T RJ-45 PoE+ u00a6 8 x 10Gbit LAN SFP+ u00a6 1 x management (LAN) RJ-45 u00a6 1 x console (USB) Type C management u00a6 1 x serial (console) RJ-45 management u00a6 1 x USB Type A
Power Device Internal power supply - hot-plug
Installed Qty 1 (installed) / 2 (max)
Power Redundancy Scheme 1+1 (with optional power supply)
Power Provided 920 Watt
Voltage Required AC 100 - 240 V (50/60 Hz)
Included Accessories Rubber feet
Cables Included 1 x console cable
Rack Mounting Kit Included
MTBF 104,626 hours
Service & Support Limited warranty - lifetime
Min Operating Temperature 23 u00b0F
Max Operating Temperature 113 u00b0F
Humidity Range Operating 5 - 95% (non-condensing)
Min Storage Temperature -13 u00b0F
Max Storage Temperature 158 u00b0F
Humidity Range Storage 0 - 95% (non-condensing)