Description
Description: EXTD KIT 2PC SUPER UP TO 200FT DVI OVER
Tripp Lite DVI Over Cat5/Cat6 Video Extender Kit Transmitter Receiver 200′ – Video extender – over CAT 5/6 – up to 200 ft
The B140-101X is a DVI Over Cat5 Active Extender Kit that comes with both transmitter and receiver units. It transmits a DVI-D Single-Link signal up to 61 m (200-ft.) away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite’s N202-Series). The B140-101X is compatible with all operating systems, and is plug and play, with no software or drivers required. It features a built-in Equalization control for adjustment of the video image.
Installation is simple. Connect the built-in DVI connector on the transmitter unit to a DVI source. Connect the receiver unit to a display using a Tripp Lite P561-Series DVI cable (not included). Finally, the RJ45 ports on the transmitter and receiver units are connected using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 46 m (150-ft.) from the source, , or a 1024 x 768 @ 60Hz signal up to 61 m (200-ft.).
Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active receiver) in a single chain, for a total of 4 displays.(An active receiver should be the last unit in a chain) A 1920 x 1080 @ 60Hz signal can be extended up to 38 m (125-ft.) from each repeater to the next unit in the chain, or a 1024 x 768 @ 60Hz signal can be extended up to 53 m (175-ft.) For international use, the B110-INT power supply can be purchased separately; it features plugs for the UK, Europe, and Australia.
Key Selling Points
Extends a DVI-D single-link signal
No software or drivers required
Compatible with all operating systems
Remote unit is wall-mountable