Meraki Z3C Teleworker Gateway
If you are going to have teleworkers, you need to have a way to protect your data, and equipment in the employee’s home. Luckily, Cisco Meraki had the answer with the Z-Series telework gateway. Z Series consists of the Z3 and the Z3C LTE Teleworker Gateway. The models are virtually the same, except the Z3C offers an additional cellular failover option with an integrated CAT 3 LTE Modem. We will be looking at the Meraki Z3C.
About the Meraki Z3C
The Z3C is a combination firewall, VPN gateway, and router. With the Meraki Z3C, administrators can deploy network services including VoIP and remote endpoints with automatic, zero-touch provisioning. All Meraki devices are managed via the Meraki cloud. It has an incredibly intuitive browser-based interface. Since the Z-series is self-configuring and managed over the web, you can rapidly deploy at remote locations without any assistance from end-users. Meraki Cloud services monitor all devices 24×7. And, they deliver real-time alerts if any device encounters a problem.
Under the Hood
The Z3C has 4 GbE ports for printers, phones and other wired devices. It also has 1 PoE-enabled port for VoIP phones and other powered devices. There’s also a 1 Gbe RJ45 WAN port, and 1 USB port for cellular failover. The Z3C also has dual-concurrent 802.11ac Wave 2 radios with up to 1.3 Gbps data rate. It has a stateful firewall throughput of 100 Mbps, and a maximum VPN throughput of 50 Mbps.
Meraki Z3 Setup
The Meraki Z3C is a desktop form factor. It can easily be placed on a computer desk. It weighs less than a pound, and is roughly 6 inches wide and 10 inches long. So, it won’t take up a lot of space. This makes it convenient to setup and plug in your devices. Especially if you are using a VoIP desktop phone. The Meraki Z3C can even provide power to your phone using the PoE port.
The Meraki Z3 is ideal for companies that need to extend protection beyond the office. In other words, into the homes of their remote employees. Because it is so easily cloud-managed, all you have to do is ship the device to your users, and have them plug it in. As soon as it is online, you will see it in your Meraki cloud dashboard, and you can begin to manage the Z3C immediately.
Meraki Z3C At-A-Glance
|L3/L7 Stateful Firewall
|Data Rate 1.3 Gbps
|Automatic WAN Failover to Cellular Uplink
|Built-in Cellular 100 Mbps CAT 3 LTE Uplink (requires SIM card)